CTEK DC-DC / CBE C-Line 12V & 240V Mains Hook Up Camper Kit With Flexible Solar Panel

PLEASE NOTE - AS WE ARE NOW ENTERING THE BUSY PERIOD OF THE YEAR FOR CONVERTING VANS, THE LEAD TIME ON THIS KIT IS CURRENTLY 1-2 WEEKS.

This kit will provide you the following functions -

12V LEISURE BATTERY CHARGING

Leisure battery charging from the alternator on your van. This is powered by a CTEK D250SE dual input DC-DC charger.

The CTEK D250SE is a fully automatic, 5 stage DC-DC charger that supplies up to 20A of power to any 12V lead acid or ­lithium leisure battery from 40–300Ah.

It has ­selectable charging algorithms for standard lead acid, AGM and lithium batteries and can use power through its dual input from the alternator fitted to your van and an optional solar panel controlled by MPPT. When the service battery is fully charged, the D250SE will ­automatically redirect maintenance charge ­power to the starter battery.

The D250SE can maintain a stable output up to 20A to vehicles fitted with smart ECU controlled ­alternators and also has a temperature sensor for optimised charging, regardless of weather conditions.

WHAT MAKES UP THIS PART OF THE KIT?

• CTEK D250SE 20A DC-DC Battery To Battery Charger (Standard Or Smart Alternator & Solar Input)
  
• 5M 16mm² Red High Flex Battery Cable 
  
• 1M 16mm² Black High Flex Battery Cable
  
• 5M 2.0mm² Red Single Core Thin Wall Automotive Cable (For Switched Live (Smart))
  
• 5M 2.0mm² Black Single Core Thin Wall Automotive Cable And In Line Fuse For Lithium (For Battery Selection)
  
• Set Of Leisure Battery Terminals With PVC Covers
  
• 2 X Bolt Down MIDI Fuse Holders With Fuses

TECHNICAL DETAILS

• Brand & Model - CTEK D250SE
• Alternator Technology - Standard & Smart
• Solar Panel Control Technology - MPPT
• Solar Input - 50 - 300 W (Max OCV 23V)
• Battery Voltage - 12V>12V
• Battery Chemistry - Lead Acid & Lithium-Ion
• Ambient Operating Temperature - -20˚C to +50˚C
• Input - 11.5 - 23V - 25 A
• Lead Acid Output - 14.4/14.7V - 20A
• Lithium Output - 14.2V - 20A

OPTIONAL 100W SEMI FLEXIBLE EFTE SOLAR PANEL

This particular model features the junction box and cable on the rear side of the panel to create a completely level surface and professional finish after installation. Unlike other solar panels, the junction box on this solar panel is a circular shape with only one dual core cable (3m length) attached, allowing for simplified installation.  Please note: in order for this panel to be flush-mounted, a recess must be cut in to the roof/surface.

This solar panel has a unique black backing, making it ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells.

The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter).

TECHNICAL DETAILS

• Peak power: 100W
• Maximum power voltage: 19.1V
• Maximum power current: 5.24A
• Open circuit voltage: 22.3V
• Short circuit current: 5.50A
• Dimensions: 990 x 540 x 2 mm
• Weight: 1.92 kg

12V 12 WAY FUSE BOX

This is the central hub for the distribution of 12V power. This runs from your leisure battery via a fuse.

WHAT MAKES UP THIS PART OF THE KIT?

• 12V 12 Way blade fuse box block holder with LED indicator & fuses
• Bolt Down MIDI Fuse Holders With Fuse
• 3M 16mm² Red hi-flex battery cable
• 3M 16mm² Black hi-flex battery cable

TECHNICAL DETAILS

• Built in negative bus bar
• LED function on each output that will illuminate to show any blown fuses
• Numerous labels for easy identification of outputs
• Complete with 6 fuses (2 X 5A, 2 X 10A, 2 X 15A)
• Mounting screws

12V ACCESSORIES

Coming from four of the available outlets on the 12 way fuse box, the following are provided to give you multiple charging points, either via USB A, USB C or a standard 12V port. Switches are also included for lighting and any other low current 12V item you would like to control.

WHAT MAKES UP THIS PART OF THE KIT?

• C Line USB A 1A & USB A 2.1A Phone / Tablet Charging Port
  
• C-Line USB C 18W 3.0A & USB A 2.4A Phone / Tablet Charging Port
  
• C Line 12V 6A Single Charger Power Port
  
• CBE Double Unipolar Two Position Single Pole Switch
  
• CBE Single Unipolar Two Position Single Pole Switch

240V MAINS HOOK UP

This part of the kit will allow you to hook up to a standard 16A camp site site hook up and will then power the mains sockets in the van. 

This mains consumer unit will be 90% pre-assembled with all the major wiring completed. All you need to do is route the cables in your van and wire the hook up point and the sockets.

WHAT MAKES UP THIS PART OF THE KIT?

• IP65 Rated 8 way enclosure with earthing bar
• CHINT 63A 30 mA Double pole RCD
• 3 X CHINT 10A Double Pole MCBs for double sockets
• Flush hook up point available in black or white
• 5M 2.5mm2 3 core arctic blue flexible mains cable
• 3 X 3M 1.5mm2 3 core white flexible mains cable
• 3 X C-Line 13A sockets with back boxes
• 2M 6mm2 tri rated earth cable
• Safety stickers

TECHNICAL DETAILS

• Main input protected with double pole RCD
• Each Individual outlets protected with double pole MCBs
  

SMART MAINS LEISURE BATTERY CHARGER

This is small but vital part of the kit. These chargers are hard wired onto the leisure battery terminals in the van. It serves various functions but the two main ones enable you to keep your leisure battery topped up at home as the charger can be left attached permanently but also when on site, it keeps power to your battery so that you can continue to run your 12V equipment without having to start the van or rely on solar.

WHAT MAKES UP THIS PART OF THE KIT?

• 12V 10A/9A 6 Stage (Lead Acid/AGM) / 4 Stage (Lithium) mains smart intelligent leisure battery charger & maintainer
• Short circuit, over charge and reverse polarity protection
  
• Leisure battery charger output - 10A (Lead Acid/AGM) / 9A (Lithium)
• Max Voltage - 14.5V Lead Acid / 14.9V AGM / 14.4V Lithium
• LCD Screen showing charging current, battery condition and voltage
• LCD Screen showing charging current, battery condition and voltage A
  

ADDITIONAL ITEMS INCLUDED

• All fuses, crimps and heatshrink needed to complete the installation
• 2 X Two module C-Line Grey Inner and outer support frames
• One module C-Line Grey Inner and outer support frame
• Three module C-Line Grey Inner and outer support frame
• 100 cable tie bases
  
• 100 cable ties

IMPORTANT INFORMATION

We will provide adequate lengths of cable to complete the installation as seen on the screen, the lengths provided are suitable for most camper installations, but if you need anymore, this is all available to buy on our website.

Although we have listed the 12V cable as separate lengths in each part of the kit, these are only suggestions as we know sometimes this isn't suitable and you need longer or shorter lengths. So all of the same cable will be provided on a continuous roll for you to cut up and install as per your build to give you a bit more flexibility.

For use to wire both the input and output of the DC-DC charger and the cabling to the 12V fuse boxes and bus bars -

16mm² Red Positive Hi Flex - 10M
16mm² Black Negative Hi Flex - 10M

For use to wire from the low current 12 way fuse box to your 12V accessories -

2.0mm² Twin core automotive thin wall cable - 30M

As with all the kits and layouts provided on our site, they serve as a guide only and we recommend all wiring and installation is carried out by a qualified professional. Disconnect all AC and DC power sources to prevent accidental shock. It is the installer’s responsibility to ensure compliance with all the applicable installation codes, regulations, and to ensure the equipment is fitted correctly.