Victron Energy Multiplus 12/1600/70 On/Off Grid Camper Mains Wiring Kit
Victron Energy Multiplus 12/1600/70 On/Off Grid Camper Mains Wiring Kit
Low stock: 1 left
- FREE DELIVERY WHEN YOU SPEND OVER £150
- UK BASED CUSTOMER SUPPORT
- WE'RE RATED EXCELLENT ON TRUSTPILOT
HIGH LEVEL KIT FEATURES
- 1600VA (1300W) Inverter Charger with power boost function on mains (Optional)
- Mains hook up incoming and outgoing distribution system
- DC Power kit
COMPONENTS
VICTRON ENERGY MULTIPLUS 12/1600/70 INVERTER CHARGER (OPTIONAL)
This new style Victron MultiPlus 1600VA is set to replace the earlier MultiPlus Compact range. It is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure.
The MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology, and a highspeed AC transfer switch in a single compact enclosure.
- Input voltage range - 9.5 – 17V
- Output Output voltage - 230VAC ± 2% Frequency: 50Hz ± 0,1% (1)
- Cont. output power at 25°C(3) - 1600VA
- Cont. output power at 25°C - 1300W
- Cont. output power at 40°C - 1100W
- Cont. output power at 65°C - 800W
- Peak power - 2800W
- Maximum efficiency - 93%
- Zero-load power - 10W
- Zero-load power in search mode - 3W
- AC Input - Input voltage range: 187-265VAC / Input frequency: 45 – 65Hz
- Charge voltage 'absorption' - 14.4V
- Charge voltage 'float' - 13.8V
- Storage mode - 13.2V
- Leisure battery charge current - 70A
- Starter battery charge current - 1A
- Battery temperature sensor - Yes
- Weight - 10.2KG
- Dimensions (hxwxd) - 470 x 265 x 120 mm
INCOMING MAINS CONSUMER UNIT (Pre Assembled)
This is a small mains consumer unit that runs from the surface mount 16A hook up point on the outside of your van and feeds the input of the inverter. This protects the inverter from any power surges and overloads and is the first point of safety, providing an earth to both the inverter body and the chassis of your camper van.
- 5 Way plastic consumer unit
- 30mA 63A Double pole RCD
- 16A Double pole MCB
- 63A DP Bus bar
- Surface mounted 16A magnetic hook up point (Available in black or white)
- Relevant electrical safety stickers
- Hook up input - 2.5mm² three core arctic flex - 5M
- Inverter input - 2.5mm² three core flex - 2M
- Inverter earth (Terminated with ring terminal) - 6mm² tri rated flex - 2M
- Vehicle earth (Terminated with ring terminal) 6mm² tri rated flex - 2M
OUTGOING MAINS CONSUMER UNIT (Pre Assembled)
This is the central mains consumer unit for the camper van. This takes the output from the inverter/hook up and feeds the power via double pole RCD's and MCB's to the mains sockets and switches.
- 8 Way plastic consumer unit
- 30mA 63A Double pole RCD
- 3 X 10A Double pole MCB's
- Neutral 63A DP Bus bar
- 3 X 13A UK double sockets
- 3 X double surface mount back boxes
- Single surface mount back box
- Inverter output - 2.5mm² three core flex - 2M
- Sockets & Switches - 1.5mm² three core flex - 3M each
- Vehicle earth (Terminated with ring terminal) 6mm² tri rated flex - 2M
ADDITIONAL ITEMS
- Relevant fuses and fuse holders
- Battery terminals with PVC covers
- High Current DC Isolator
CABLING
We will provide adequate lengths of cable to complete the installation as seen on the screen, the lengths provided are suitable for most camper installations, but if you need anymore, this is all available to buy on our website.
For use to wire the Multiplus Inverter Charger via the isolator and from the leisure battery -
- 50mm² Red Positive Hi Flex - 3M
- 50mm² Black Negative Hi Flex - 3M
All crimps, terminals, and heat shrink will be provided in the kit to make the necessary connections.
ADDITIONAL IMPORTANT INFORMATION
As with all the kits and layouts provided on our site, they serve as a guide only and we recommend all wiring and installation is carried out by a qualified professional. Disconnect all AC and DC power sources to prevent accidental shock. It is the installer’s responsibility to ensure compliance with all the applicable installation codes, regulations, and to ensure the equipment is fitted correctly.