The main part of any hot water system is obviously going to be the hot water tank. Our 10L stainless steel tank, its fitted with an 800W element and simply plugs into any existing 13A socket.
Simple to operate and fit and forget, just one cold water inlet and one hot water outlet with an adjustable temperate dial.
The tank has feet already fitted to the underside so simply needs to be installed on a flat surface and screwed down.
Most tanks of this type are made of 0.8mm thick stainless steel with a stainless steel 316L heating element. We have upgraded this, so our tank walls are 1mm thick and the element has also been changed from steel, to incoloy 840 to improve the quality and longevity of the heater.
Voltage - 220V - 240V
Power - 800W
Capacity - 10L
Current Draw When Heating- 3.48 Amps
Max Water Temperature - 75°C
Tank Thickness - 1mm
Heating Element - Incoloy 840
Built in thermal cut out
Certification - CE
For your safety, this tank should always be fitted with both a pressure relief valve and expansion vessel.
Approx. size of the tank with feet and outlet valves is –